Gholamreza Chegini

Gholamreza Chegini

Academic Rank : Associate Professor
Campus of Agriculture and Natural Resources / Aburaihan Campus / Agricultural Engineering Department / Campus of Agriculture and Natural Resources / Aburaihan Campus
Contact Number : 02136040614
Scopus
  • 1152 Citations
  • 16 h-Index
as of : 2025-03-01

Scholarly Works
20052025

  • 1152Citations
  • 16 h-Index
  • 72 Article
  • 56 Conference
2025

1. Laboratory Methods for the Measurement of Spray Characteristics of the Nozzles in UAV Sprayers: A Review

Chegini Gholamreza, Ashtiani Araghi Alireza, Behic Tekin Aref, Lee Chungu (2025)., Journal of Biosystems Engineering, 50(1).
2024

1. Investigating the energy consumption, specific energy and activation energy of thin layers of tomato pulp in a microwave dryer

Salimi Hamid, Kermani Ali Mashaallah, خفاجه حمید, Chegini Gholamreza, آدمی محمد (2024)., The 16th National Congress of Biosystem Mechanical Engineering and Agricultural Mechanization, 2-4 October, Mashhad, Iran.

2. Investigating the methods of separating seeds from tomato pulp

آدمی محمد, Chegini Gholamreza, Salimi Hamid, Kermani Ali Mashaallah (2024)., The 16th National Congress of Biosystem Mechanical Engineering and Agricultural Mechanization, 2-4 October, Mashhad, Iran.

3. Drying kinetics of thin layers of tomato pulp in a microwave dryer

[] [], Chegini Gholamreza, خفاجه حمید, Kermani Ali Mashaallah, آدمی محمد (2024)., The 16th National Congress of Biosystem Mechanical Engineering and Agricultural Mechanization, 2-4 October, Mashhad, Iran.

4. Design and construction of a solar energy amplifier for solar dryer

Farhadi Mohammad Javad, Arabhosseini Akbar, Chegini Gholamreza (2024)., 18th International Conference on Food Industry Sciences,Organic Farming and Food Security, 16 August, Tbilisi, Armenia.

5. Energy analysis by simulating the geometry and climatic parameters of a miniature rose greenhouse in TRNSYS and validation with measured data

ثوابی بهشتی وحید, Chegini Gholamreza, Arabhosseini Akbar (2024)., Iranian Journal of Biosysteme Engineering, 55(2).

6. Construction and Evaluation of a Vertical Greenhouse with Artificial Light of LED

Chegini Gholamreza, Aliniaeifard Sasan, Khoram Tabrizi Mohamad Reza (2024)., Journal of Engineering Research in Agricultural Mechanization and System, 24(88).
2023

1. Design, construction of a vertical greenhouse with LED artificial light (PFAL)

Chegini Gholamreza, Khoram Tabrizi Mohamad Reza (2023)., 15th National & 1st International Congress on Mechanics of Biosystems Engineering & Agricultural Mechanization, 20-22 September, Karaj, Iran.

2. Design and construction of a device for induce xylem cavitation using centrifuge method

بخشی حمیدرضا, Chegini Gholamreza (2023)., 15th National & 1st International Congress on Mechanics of Biosystems Engineering & Agricultural Mechanization, 20-22 September, Karaj, Iran.

3. Investigating the performance and characteristics of lettuce growth in different environmental conditions of a vertical greenhouse with artificial light

Chegini Gholamreza, Khoram Tabrizi Mohamad Reza (2023)., 15th National & 1st International Congress on Mechanics of Biosystems Engineering & Agricultural Mechanization, 20-22 September, Karaj, Iran.
2022

1. Modeling and predicting of water production by capacitive deionization method using artificial neural networks

Salari Kamran, Zarafshan Payam, Khashehchi Morteza, Pipelzadeh Ehsan, Chegini Gholamreza (2022)., Desalination, 540(15), 115992.

2. Designing and manufacture a natural vacuum generating system for use in food processing industries

Razm Amin, Chegini Gholamreza, Kermani Ali Mashaallah (2022)., 14th National Congress of Mechanical Engineering of Biosystems and Mechanization of Iran, 6-8 September, Kermanshah, Iran.

3. Robust design of a novel regenerative heat exchanger with high porosity ceramic matrix to waste heat recovery of flue gas

Ataeiyan Behnam, Kouravand Shahriar, Chegini Gholamreza (2022)., EXPERIMENTAL HEAT TRANSFER, 36(1), 26-46.

4. Knowledge and Technology Used in Capacitive Deionization of Water

Salari Kamran, Zarafshan Payam, Khashehchi Morteza, Chegini Gholamreza, Etezadi Hamed, Karami Hamed, Szulzyk-Cieplak Joanna, Lagod Grzegorz (2022)., Membranes, 12(5), 459.

5. sepearation of seeds of medicinal plants

Chegini Gholamreza (2022)., International conferences of Medicinal plant, Mechanization and process, 21-23 February, Karaj, Iran.

6. Evaluation of drying time and amount of essential oil extracted from Peppermint with air-impingement jet dryer

Kermani Ali Mashaallah, Chegini Gholamreza, Seifi Amirarsalan (2022)., International Congress of the Medicinal Plants: Mechanization and Processing Congress, 21-23 February, Karaj, Iran.

7. Purification of zenian plant using corona electrode electrostatic separator

Asadnezhad Sadeq, Chegini Gholamreza, Jafari Mohammad, Dehghani Soufi Masoud (2022)., International conferences of Medicinal plant, Mechanization and process, 21-23 February, Karaj, Iran.

8. Different methods of greehouse energy audit, A Review

Mohebbi Sadaf, Chegini Gholamreza, شهبازی رضا (2022)., The 11th National Conference on Environment,Energy and Sustainable Natural Resources, 27-28 January, Tehran, Iran.
2021

1. Modeling and Control of a Pollinator Flying Robot

Mazinani Mozhdeh, Zarafshan Payam, Dehghani Mohammad, Etezadi Hamed, Vahdati Kourosh, Chegini Gholamreza (2021)., 2021 9th RSI International Conference on Robotics and Mechatronics (ICRoM), 17-19 November.

2. Design and Manufacture of an Aerial Pollinator Robot for Walnut Trees

Mazinani Mozhdeh, Dehghani Mohammad, Zarafshan Payam, Etezadi Hamed, Vahdati Kourosh, Chegini Gholamreza (2021)., 2021 9th RSI International Conference on Robotics and Mechatronics (ICRoM), 17-19 November.

3. Deep Learning Prediction of Chlorophyll Content in Tomato Leaves

Imanzadeh Khoshrou Mohsen, Zarafshan Payam, Dehghani Mohammad, Chegini Gholamreza, Arabhosseini Akbar, zakeri behzad (2021)., 2021 9th RSI International Conference on Robotics and Mechatronics (ICRoM), 17-19 November.

4. 3D plant support CNC wire bending machine-Part 1

بخشی حمیدرضا, Chegini Gholamreza, Zarafshan Payam, Arabhosseini Akbar (2021)., National Conference on Mechanical and Aerospace Engineering, 17-18 September.

5. 3D plant support CNC wire bending machine-Part 3

Bakhshi Hamidreza, Chegini Gholamreza, Zarafshan Payam, Arabhosseini Akbar (2021)., National Conference on Mechanical and Aerospace Engineering, 17-18 September.

6. 3D plant support CNC wire bending machine-Part 4

بخشی حمیدرضا, Chegini Gholamreza, Zarafshan Payam, Arabhosseini Akbar (2021)., National Conference on Mechanical and Aerospace Engineering, 17-18 September.

7. 3D plant support CNC wire bending machine-Part 2

بخشی حمیدرضا, Chegini Gholamreza, Zarafshan Payam, Arabhosseini Akbar (2021)., National Conference on Mechanical and Aerospace Engineering, 17-18 September.