رضا محمودی

1. Effect of intercritical annealing time and processing route on the tensile and shear mechanical properties of dual-phase (DP) steel

Mirzamohammadi Sina، Mirzadeh Soltanpour Hamed، Mahmuodi Reza (2025)., Journal of Materials Research and Technology-JMR&T, 37(-), 4372-4381.

2. Achieving strength-ductility synergy in AISI 904L superaustenitic alloy through severe plastic deformation and post-deformation annealing

Roostaei Milad، Sohrabi Mohammad javad، Wurster Stefan، Renk Oliver، Kalhor Alireza، Mobasheri Mohammad، Mirzadeh Soltanpour Hamed، Spieckermann Florian، Rodak Kinga، Mahmuodi Reza، Pippan Reinhard (2025)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 935(-), 148382.

3. Temperature-dependent mechanical properties of as-cast Mg-Gd-Zr alloys evaluated by shear punch testing

Maghzi Mohammadreza، Mirzadeh Soltanpour Hamed، Mahmuodi Reza (2025)., Journal of Materials Research and Technology-JMR&T, 36(-), 417-423.

1. Grain refinement and improved mechanical properties of as-cast Mg-3Gd alloy by Zr addition

Maghzi Mohammadreza، Mirzadeh Soltanpour Hamed، Mahmuodi Reza (2025)., Journal of Materials Research and Technology-JMR&T, 35(-), 2346-2353.

2. Microstructural stability and softening resistance of cast AZ81 and AZ81+1RE magnesium alloys

Geranmayeh Abdol Reza، Ashrafizadeh Seyed Masoud، Mahmuodi Reza (2025)., Journal of Materials Research and Technology-JMR&T, 35(-).

3. Mitigating the adverse effect of grain refinement on the ductility of a metastable high-entropy alloy towards superior strength-ductility synergy

Sohrabi Mohammad Javad، Sadeghpour Galooyak Saeed، Mehranpour Mohammad Sajad، Kalhor Alireza، Roostaei Milad، Mirzadeh Soltanpour Hamed، Rodak Kinga، Dehghanian Changiz، Mahmuodi Reza، Hyoung Seop Kim (2025)., Applied Materials Today, 42(-), 102605.

4. Impression creep of a cast Ag-doped AZ91 magnesium alloy

Allami Ahmad، Geranmayeh Abdol Reza، Mahmuodi Reza (2025)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 921(-), 147599.

5. A comparative study on tribological and mechanical behavior of as-cast and aged Mg-6Gd-2Ag-0.6Zr alloy at elevated temperatures

Mansouri Amir، Ghasemi Monfared Rad Hamid Reza، Heydarzadeh Sohi Mahmoud، Mahmuodi Reza (2024)., Journal of Materials Research and Technology-JMR&T, 33(-), 9415-9425.

6. Impression creep behavior of extruded Mg–TiO2 composites prepared by powder metallurgy

Arbabi Shima، Noori Hadi، Mahmuodi Reza (2024)., Materials Today Communications, 41(-), 110896.

7. Remarkable mechanical properties at room and cryogenic temperatures in a metastable high-entropy system through BCC and HCP martensitic transformations

Sohrabi Mohammad javad، Sadeghpour Saeed، Mehranpour Mohammad Sajad، Kalhor Alireza، Mirzadeh Soltanpour Hamed، Rodak Kinga، Mahmuodi Reza، Hyoung Seop Kim (2024)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 915(-), 147245.

8. Shear mechanical properties of AISI 316L stainless steel processed by unidirectional/cross rolling and annealing treatment

Mohammadzehi Sara، Mirzadeh Soltanpour Hamed، Mahmuodi Reza (2024)., MATERIALS CHEMISTRY AND PHYSICS, 327(-), 129928.

9. Remarkable Cryogenic Strength and Ductility of AISI 904L Superaustenitic Stainless Steel: A Comparative Study

Sohrabi Mohammad javad، Mirzadeh Soltanpour Hamed، Sadeghpour Saeed، Mahmuodi Reza، Kalhor Alireza، Rodak Kinga، Hyoung Seop Kim (2024)., METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 55(11), 4310-4317.

10. Exceptional strength-ductility synergy in the novel metastable FeCoCrNiVSi high-entropy alloys via tuning the grain size dependency of the transformation-induced plasticity effect

Mehranpour Mohammad Sajad، Sohrabi Mohammad javad، Kalhor Alireza، Lee Jae Heung، Heydarinia Ali، Mirzadeh Soltanpour Hamed، Sadeghpour Saeed، Rodak Kinga، Nili Ahmadabadi Mahmoud، Mahmuodi Reza، Hyoung Seop Kim (2024)., INTERNATIONAL JOURNAL OF PLASTICITY, 182(-), 104115.

11. Deformation-induced martensitic transformation kinetics in TRIP-assisted steels and high-entropy alloys

Sohrabi Mohammad javad، Mehranpour Mohammad Sajad، Heydarinia Ali، Kalhor Alireza، Lee Jae Heung، Mirzadeh Soltanpour Hamed، Mahmuodi Reza، Habibi Parsa Mohammad، Rodak Kinga، Hyoung Seop Kim (2024)., ACTA MATERIALIA, 280(-), 120354.

12. Correlation Between Microstructural Features and Corrosion Resistance in a Fine-Grained Severely Deformed Biodegradable Mg‒4Zn Alloy

Sabbaghian Mahdi، Mahmuodi Reza، Shin Kwang Seon (2024)., METALS AND MATERIALS INTERNATIONAL, 31(4), 1025-1039.

13. Interplay between temperature-dependent strengthening mechanisms and mechanical stability in high-performance austenitic stainless steels

Sohrabi Mohammad javad، Mirzadeh Soltanpour Hamed، Sadeghpour Galooyak Saeed، Zolfipour aghdam vayghan Milad، Geranmayeh Abdol Reza، Mahmuodi Reza (2024)., International Journal of Minerals Metallurgy and Materials, 31(10), 2182-2188.

14. Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel

Sohrabi Mohammad javad، Mirzadeh Soltanpour Hamed، Sadeghpour Galooyak Saeed، Geranmayeh Abdol Reza، Mahmuodi Reza (2024)., International Journal of Minerals Metallurgy and Materials, 31(9), 2025-2036.

15. Effect of cold rolling route and annealing on the microstructure and mechanical properties of AISI 316 L stainless steel

Mohammadzehi Sara، Roostaei Milad، Mirzadeh Soltanpour Hamed، Mahmuodi Reza، Wessensteiner Irmgard (2024)., MATERIALS CHARACTERIZATION, 214(-), 114072.

16. Annealing of an Austenitic Stainless Steel Deformed Under Shear Loading

Zergani Aqil، Mirzadeh Soltanpour Hamed، Mahmuodi Reza (2024)., Metallography Microstructure and Analysis, 13(-), 436-442.

17. Improved hardness of Mg-0.5Ni-xY alloys via grain refinement and formation of LPSO structures

Mahmoud Kalayeh Parastoo، Mirzadeh Soltanpour Hamed، Malekan Mehdi، Emamy Massoud، Mahmuodi Reza (2024)., Journal of Materials Research and Technology-JMR&T, 30(-), 6829-6835.

1. MicroArt

Sabbaghian Mahdi، Mahmuodi Reza (2024)., Metallography Microstructure and Analysis, 13(-), 191.

2. Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steel

Sohrabi Mohammad javad، Roostaei Milad، Mirzadeh Soltanpour Hamed، Spieckermann Florian، Geranmaye Abdol Reza، Mahmuodi Reza (2024)., VACUUM, 220(1), 112830.

3. Using Solution Heat Treatment and Multi Directional Forging to Improve the Mechanical and Corrosion Properties of an Mg–2Zn–0.2Ag Alloy

Asadollahi Mohammad، Alizadeh Reza، Mahmuodi Reza، Labbaf Sheyda، Sadrnezhaad Sayed Khatiboleslam، Atari Mehdi (2024)., METALS AND MATERIALS INTERNATIONAL, 30(-), 1538-1555.

4. Strain Rate Sensitivity Measured from Different Continuous Macro-indentation Methods

Geranmayeh Abdol Reza، Mahmuodi Reza (2024)., JOM, 76(6), 2929-2935.

5. Tailoring the microstructure and mechanical properties of LPSO-containing Mg–Ni cast alloy by yttrium addition

Mahmoud Kalayeh Parastoo، Asadi Amir Hossein، Mirzadeh Soltanpour Hamed، Malekan Mehdi، Emamy Massoud، Mahmuodi Reza (2024)., Journal of Materials Research and Technology-JMR&T, 28(1), 744-751.