Moslem Shahverdi

1. Load transfer behavior of 3D printed concrete formwork for ribbed slabs under eccentric axial loads

Raza Saim, Manshadi Behzad, Sakha Mahsa, Widmann Robert, Wang Xiaomeng, Fan Haifeng, Shahverdi Moslem (2025)., ENGINEERING STRUCTURES, 322(Part B), 119148.

1. Development and characterization of thin iron-based shape memory alloy prestressing wire

Triantafyllidis Zafiris, Jaydeepkumar Oza Meet, Michels Julien, Wyrzykowski Mateusz, Shahverdi Moslem (2024)., Procedia Structural Integrity, 64(-), 2083-2090.

2. Digital Fabrication of Ribbed Slabs With Post-Tensioned 3D Printed Concrete Formwork

Raza Saim, Sakha Mahsa, Manshadi Bezad, Fan Haifeng, Wang Xiaomeng, Shahverdi Moslem (2024)., Procedia Structural Integrity, 64(-), 1176-1183.

3. Performance of RC Beams with NSM Fe-SMA after Eight-Year Exposure and Sustained Loading

Harmanci Yunus, Czaderski Christoph, Shahverdi Moslem (2024)., Procedia Structural Integrity, 64(-), 2067-2074.

4. Self-Centering of RC Columns with Prestressed Fe-SMA Reinforcement

Esmaelian Mohammad, Raza Saim, Shekarchi Zadeh Mohammad, Motevali Masoud, Shahverdi Moslem (2024)., Procedia Structural Integrity, 64(-), 2091-2100.

5. Study of activation parameters in Fe-SMA reinforced concrete structures using multiphysics modelling

Saeedi Ali, Tabrizikahou Alireza, Shahverdi Moslem (2024)., Procedia Structural Integrity, 64(-), 2044-2050.

6. Innovations to Improve 3D Concrete Printing of Portland Cement-Steel Slag Blended Mortars

Hassan Zohaib, Raza Saim, Shafei Behrouz, Mahoutian Mehrdad, Shahverdi Moslem (2024)., Procedia Structural Integrity, 64(-), 1184-1191.

7. Characterization of low-temperature creep and stress relaxation of an iron-based shape memory alloy (Fe-SMA) using in-situ synchrotron diffraction

Jaydeepkumar Oza Meet, Stark Andreas, Polatidis Efthymios, Barriobero Vila Pere, Shahverdi Moslem, Leinenbach Christian (2024)., MATERIALS & DESIGN, 247(-), 113378.

8. Studying the Effect of Shrinkage Reducing Admixture on 3D Printed Concrete Properties

زیارتی امیر علی, Ramezanianpour Amir Mohammad, دانش پسند محمدرضا, Eskandari-ghadi Morteza, Shahverdi Moslem, صادقی مرزاله عبدالله, ظفرمومن نیما (2024)., Structural Engineering, 11(7), 5-22.

9. Studying the Effect of Expansive Agents on 3D-Printed Concrete Properties

دانش پسند محمدرضا, Ramezanianpour Amir Mohammad, زیارتی امیر علی, Shahverdi Moslem, صادقی مرزاله عبدالله, Eskandari-ghadi Morteza, ظفرمومن نیما (2024)., Structural Engineering, 11(6), 26-46.

10. Corrosion Behavior of Heat‐Treated Fe‐Based Shape Memory Alloys

Vivek Kulkarni Pranav, aydeepkumar Oza Meet J, Igual-Munoz Anna, Sallese Jean-Michel, Shahverdi Moslem, Leinenbach Christian, Mischler Stefano (2024)., MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, -(-).

11. Design and multiphysical modeling of SMA-driven bi-stable structures with efficient energy consumption

Saeedi Ali, Kwon Hyunchul, Soni Priyank, Dillenburger Benjamin, Shahverdi Moslem (2024)., ENGINEERING STRUCTURES, 314(-), 118367.

12. Nonlinear finite element modelling of the bond behavior of near-surface mounted Fe-SMA bars

Khodkari Naser, raza saim, Schranz Bernhard, Harmanci Yunus Emre, Mohammadi Tochaei Soheil, Motevali Masoud, Shahverdi Moslem (2024)., STRUCTURES, 66(0).

13. From experimental testing to computational modeling: A review of shape memory alloy fiber-reinforced concrete composites

Tabrizikahou Alireza, Kuczma Mieczyslaw, Czaderski Christoph, Shahverdi Moslem (2024)., COMPOSITES PART B-ENGINEERING, 281(-), 111530.

14. Seismic performance of Fe-SMA prestressed segmental bridge columns with 3D printed permanent concrete formwork

Raza Saim, Triantafyllidis Zafiris, Anton Ana, Dillenburger Benjamin, Shahverdi Moslem (2024)., ENGINEERING STRUCTURES, 302(1), 117423.

15. Eight-year natural environmental exposure and sustained-loading of reinforced concrete beams with iron-based shape memory alloys

Emre Harmanc Yunus, Czaderski Christoph, Shahverdi Moslem (2024)., Construction and Building Materials, 411(1), 134699.

1. Self-centering technique for existing concrete bridge columns using prestressed iron-based shape memory alloy reinforcement

Raza Saim, Widmann Robert, Michels Julien, Saiidi M. Saiid, Motevali Masoud, Shahverdi Moslem (2023)., ENGINEERING STRUCTURES, 294(1), 116799.

2. Simulation and experimental characterization of VC precipitation and recovery stress formation in an FeMnSi-based shape memory alloy

YANG Yajiao, LEINENBACH Christian, Shahverdi Moslem (2023)., Journal of Alloys and Compounds, 940(1), 168856.

1. Investigation of the effect of design parameters on the behavior of RC beams reinforced with shape memory alloys

Darvish Hesameddin, Shahverdi Moslem, Ghassemieh Mehdi (2022)., Civil engineering Modarres, 22(5), 173-185.

2. Anchorage behavior of Fe-SMA rebars Post-Installed into concrete

Raza Saim, Michels Julien, SCHRANZ Bernhard, Shahverdi Moslem (2022)., ENGINEERING STRUCTURES, 272(1), 114960.

3. Fibre optic measurements and model uncertainty quantification for Fe-SMA strengthened concrete structures

Schranz Bernhard, Wagner Paul-Remo, Czadevski Christoph, Shahverdi Moslem (2022)., ENGINEERING STRUCTURES, 256(256), 114005.

4. Shape memory alloy reinforcement for strengthening and self-centering of concrete structures—State of the art

Raza Saim, Shafei Behrouz, Saiidi M. Saiid, Motevali Masoud, Shahverdi Moslem (2022)., CONSTRUCTION AND BUILDING MATERIALS, 324(1), 126628.

1. Effect of Phase Changes on the Axial Modulus of an FeMnSi-Shape Memory Alloy

YANG Yajiao, Breveglieri Matteo, Shahverdi Moslem (2021)., MATERIALS, 14(17), 4815.

2. Strengthening and prestressing of bridge decks with ribbed iron-based shape memory alloy bars

Schranz Bernhard, Michels Julien, Czadevski Christoph, Motevali Masoud, Vogel Thomas, Shahverdi Moslem (2021)., ENGINEERING STRUCTURES, 241(241), 112467.

3. Fibre optic strain measurements for bond modelling of prestressed near-surface-mounted iron-based shape memory alloy bars

SCHRANZ Bernhard, Nunes Miguel, Czaderski Christoph, Shahverdi Moslem (2021)., CONSTRUCTION AND BUILDING MATERIALS, 288(2), 123102.