Mohammad Ghambari(retired)

1. Surface modification of AZ31 Mg alloy by diopside/fluorohydroxyapatite/graphene oxide nanocomposite coating: Corrosion and bioactivity evaluations

Jafari Zahra, Pishbin Fatemehsadat, Ghambari Mohammad, Dehghanian Changiz (2024)., JOURNAL OF ALLOYS AND COMPOUNDS, 976(-), 172961.

1. preparation and characterization of composite WC/Co through rapid omnidirectional compaction

Asnaashari Saleh, Ghambari Mohammad (2020)., JOURNAL OF ALLOYS AND COMPOUNDS, 859(157764), 1.

2. preparation of Ag/reduced grahene oxide reinforced copper matrix composite through spark plasma sintering

Sayyad Reza, Ghambari Mohammad, Ebadzadeh Touradj, Pakseresht Amir houssain, Ghasali Ehsan (2020)., CERAMICS INTERNATIONAL, 46(9), 13569.

1. Predicting breakage behavior and particle size of bronze and cast iron machining chips pulverized by jet milling

Afshari Elham, Ghambari Mohammad (2018)., ADVANCED POWDER TECHNOLOGY, 29(29).

2. Toward Unraveling the High Temperature Microstructure Processing Properties Relationship in a Ni-Free High Nitrogen Bearing Duplex Stainless Steel

khatami hossien, Zarei Hanzki Abbas, Ghambari Mohammad, Mohammadizadeh Alireza, jafari rahim, moallmi mohammad (2018)., STEEL RESEARCH INTERNATIONAL, 89(6), 1700532.

1. investigation of the behavior of grey cast iron chips in the process of jet milling

Afshari Elham, Ghambari Mohammad (2017)., the 14th scientific student conference on metallurgical and materials engineering, 3-5 October, Iran.

2. The effects of second phases on superelastic behavior of TNTZ bio alloy

Kalaie M.a, Zarei Hanzki Abbas, Ghambari Mohammad, Dastur P.., Malek J.., Farghadany Elahe (2017)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 703(1), 513-520.

3. DRY SLIDING WEAR BEHAVIOR OF ASTALOY85MO STEEL SURFACE MELTED BY GAS TUNGSTEN ARC WELDING

Aliabadi Amir, Heydarzadeh Sohi Mahmoud, Ghambari Mohammad, شیخی مقدم کاوه (2017)., New Products, 7(4), 27-38.

4. prediction of pulverization of bronze and cast iron chips via jet milling

Afshari Elham, Ghambari Mohammad (2017)., first iran congress on industrial application of advance materials and manufacturing, 24-26 May, Tehran, Iran.

5. High temperature oxidation resistance of plasma sprayed and surface treated YSZ coating on Hastelloy X

Karimi Abbas, Soltani Reza, Ghambari Mohammad, فلاح دوست میلاد (2017)., SURFACE & COATINGS TECHNOLOGY, 321(-), 378-385.

6. Production of CuSn10 bronze powder from machining chips using jet milling

Afshari Elham, Ghambari Mohammad, Abdolmalek Hamid (2017)., INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 90(1-4), 1-10.

1. Microstructure And superior mechanical properties of a multi-axially forged WE magnesium alloy

Salandari-rabori Adib, Zarei Hanzki Abbas, Fatemi Mahmoud, Ghambari Mohammad (2016)., JOURNAL OF ALLOYS AND COMPOUNDS, -(-), -.

2. The effect of microstructure on breakage of tin bronze machining chips during pulverization via jet milling

Afshari Elham, Ghambari Mohammad, Farhangi Hasan (2016)., International Journal of Minerals Metallurgy and Materials, 23(11), 1.

3. Microstructure and superior mechanical properties of a multi-axially forged WE magnesium alloy

Salandari-rabori Adib, Zarei Hanzki Abbas, Fatemi Mahmoud, Ghambari Mohammad, Moghadam Matin (2016)., JOURNAL OF ALLOYS AND COMPOUNDS, -(-), -.

4. Characterization of pre-alloyed tin bronze powder prepared by recycling machining chips using jet milling

Afshari Elham, Ghambari Mohammad (2016)., MATERIALS & DESIGN, 103(103), 208 - 201.

5. An investigation into the warm deformation behavior of Ti–6Al–1.5 Cr–2.5 Mo–0.5 Fe–0.3 Si alloy

Ghasemi Erfan, Zarei Hanzki Abbas, Momeni Faezeh, Ghambari Mohammad, Rezaie Hamidreza (2016)., Materials Science and Engineering: A, 654(-), 264-270.

6. Flow Characterization of a Duplex near α Ti6242 Alloy through Interrelation of Microstructural Evolution, 3D Activation Energy Map, and Processing Map

Rezaee Mohammad, Zarei Hanzki Abbas, Ghambari Mohammad, Dastranjy Nezhadfar Pooriya, Ghasemi Erfan (2016)., ADVANCED ENGINEERING MATERIALS, -(-), n/a-n/a.

7. Correlation between warm deformation characteristics and mechanical properties of a new TRIP-assisted Fe–MN–Ni steel

Behravan Ali, Zarei Hanzki Abbas, Ghambari Mohammad, Moallemi Ali, Mohamadizadeh Ali (2016)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 649(2), 27-34.

8. An investigation into the warm deformation behavior of Ti–6Al–1.5Cr–2.5Mo–0.5Fe–0.3Si alloy

Ghasemi Alham, Zarei Hanzki Abbas, Ghambari Mohammad, Moemeni Saeed, Rezaee Mohamad (2016)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 654(2), 264-270.

1. High Temperature Flow Behavior and Microstructure of Al-Cu/Mg 2 Si Metal Matrix Composite

Shafieizad Amirhossein, Zarei Hanzki Abbas, Ghambari Mohammad, Abbasi Bani Alireza (2015)., JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 137(2), 021006.

1. TIG surface remelting of thermal barreir coating produced by plasma spraying

کریمی عباس, Soltani Reza, Ghambari Mohammad, محمدپور امینی مصطفی (2014)., The 8th joint congress of Iranian Metallurgical Engineering Society & Iranian Foundrymen’s society, 18-19 November, Tehran, Iran.

2. Investigating corrosion behavior of Ni-Co-P electroless coating

Amaneian Sima, Allah Karam Seed Reza, Ghambari Mohammad (2014)., 15th Iranian National Corrosion Congress, 21-22 October, Tehran, Iran.

3. The high temperature flow behavior modeling of NiTi shape memory alloy employing phenomenological and physical based constitutive models: A comparative study

Shamsolhodaei Amirali, Zarei Hanzki Abbas, Ghambari Mohammad, Momeni Saeid (2014)., INTERMETALLICS, 53(53), 140-149.

4. In situ formation of Al–Al3Ni composites on commercially pure aluminium by friction stir processing

Shahi Ali, Heydarzadeh Sohi Mahmoud, Ahmadkhaniha Donya, Ghambari Mohammad (2014)., INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 75(9-12), 1331-1337.

5. Optimization of mechanical properties of iron-based recycled powder metallurgy parts and investigation of these properties by transverse rupture test

Abdollahi Hadi, Mahdavi Nezhad Ramezan Ali, Zal Vahid, Ghambari Mohammad (2014)., Mechanical Engineering modares, 14(1), 149-157.