Morad Karimpour

1. The influence of knee varus deformity on the kinetic and kinematic characteristics of musculoskeletal models during gait

Tabeiy Sina, Karimpour Morad, Shirvani Azizollah, SharafatVaziri Arash (2025)., COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, -(-), 1-8.

2. Utilizing 3d-printed patient-specific porous titanium cones in complex primary and revision total knee arthroplasty

Sharafat Vaziri Arash, Moradkhani Ghazaleh, Farahmand Farzam, Karimpour Morad, Tahmasebi Mohammad Naghi, Vosoughi Fardis, Salimi Maryam, Shayan Moghadam Ramin (2025)., EUROPEAN JOURNAL OF ORTHOPAEDIC SURGERY AND TRAUMATOLOGY, 35(1).

3. A deep learning-based multi-view approach to automatic 3D landmarking and deformity assessment of lower limb

Rostamian Reyhaneh, Shariat Panahi Masoud, Karimpour Morad, Kashani Hadi G., Abi Amirhossein (2025)., Scientific Reports, 15(-).

1. Surrogate-based positioning optimization of hip prostheses for minimal stress shielding

Mohammadizand Mahmoud, Shariat Panahi Masoud, Karimpour Morad (2024)., MEDICAL ENGINEERING & PHYSICS, 135(-), 104273.

2. Biomechanical study of using patient-specific diaphyseal femoral cone in revision total knee arthroplasty (rTKA)

Nourishirazi Reza, Moradkhani Ghazaleh, SharafatVaziri Arash, Nematy Hamidreza, Shayan-moghadam Ramin, Karimpour Morad (2024)., Journal of Orthopaedics, 57(-), 65-71.

3. Radiographic acceptable zone of endobutton placement in ACL reconstruction: A prospective study

Sharafatvaziri Arash, Tahami Mohammad, Salimi Maryam, Rabie Hamid, Vosoughi Fardi, Karimpour Morad, Moradkhani Ghazaleh, Soleymani Mosayeb (2024)., Journal of Experimental Orthopaedics, 11(4).

4. Comparative finite element analysis of contact and stress distribution in tibiotalar articular cartilage: Healthy versus varus ankles

Rajaeirad Mohadese, Karimpour Morad, Haeri Yazdi Mohammad Reza (2024)., Journal of Orthopaedics, 55(-), 16-22.

5. Finite Element Assessment of a Novel Patient‐Specific Mandibular Implant for Severely Atrophic Ridge

Parhiz Alireza, Nourishirazi reza, Asadi AmirAli, Karimpour Morad (2024)., Biomed Research International, 2024(-).

6. Biomechanical study of effect of tibial posteromedial defect depth and area on primary TKA implant stability

Nourishirazi Reza, Ayati Firouzabadi Mohammad, Hassanzadeh Mehdi, Toofan Hesam, Karimpour Morad, Mortazavi Seyed Mohammad Javad (2024)., The Knee, 49(0), 249-256.

1. Management of tibial nonunion and osteoarthritis using a 3D-printed titanium cone: A case report

Sharafat Vazi Arash, Moradkhani Ghazaleh, Karimpour Morad, Tahmasebi Mohammad Naghi, Esfandiary Soodabeh, Vosoughi Fardis, Hosseini Reihaneh (2023)., Trauma Case Reports, 48(1), 100937.

2. Impact of Varus Ankle Deformity on Tibiotalar Joint Articular Cartilage: A Finite Element Analysis

رجایی راد محدثه, Karimpour Morad, Haeri Yazdi Mohammad Reza (2023)., 30th national and 8th international Iranian Conference of Biomedical Engineering, 30 November-1 December, Tehran, Iran.

3. Specimen size effect on behavior of Mg-3Al-1Zn magnesium alloy in macro to micro-scale deformation

khandani Tohid, Faraji Ghader, Karimpour Morad (2023)., International Journal of Precision Engineering and Manufacturing, 1(1).

4. Novel modified triply periodic minimal surfaces (MTPMS) developed using genetic algorithm

Khaleghi Saeed, Baghani Mostafa, Karimpour Morad, Shariat Panahi Masoud, Wang Kui, Baniassadi Majid (2023)., Journal of Materials Research and Technology-JMR&T, 26(1), 2881-2906.

5. Tablet Geometry Effect on the Drug Release Profile from a Hydrogel-Based Drug Delivery System

Mohseni-Motlagh Seyed-Farid, Dolatabadi Roshanak, Baniassadi Majid, Karimpour Morad, Baghani Mostafa (2023)., Pharmaceutics, 15(7), 1917.

6. Experimental Investigation of Energy Absorption and Numerical Modeling of Vertical Compression on Lattice Structures Made of Thermoplastic Polyurethane

Karimi Mohammad, Haghighi Yazdi Mojtaba, Karimpour Morad (2023)., The 31st Annual International Conference of the Iranian Association of Mechanical Engineers and the 9th Conference on Thermal Power Plants, 9-11 May, Tehran, Iran.

7. Ipsilateral Concurrent Knee Arthroplasty and Tibial Osteotomy with 3D-Printed Patient-Specific Instrumentation

Sharafat Vaziri Arash, Karimpour Morad, Tahmasebi Mohammad Naghi, Hossein Seyedeh Reihaneh, Moradkhani Ghazaleh, Javidmehr Sina, Vosoughi Fardis (2023)., JBJS Case Connector, 13(4).

1. The Effect of Pore Size in 3D-Printed Porous Titanium Implant on Osseo-Integration

Moradkhani Ghazaleh, Karimpour Morad, Taheri Seyed Mahmoud (2022)., Iranian Journal of Orthopaedic Surgery, 20(1).

2. Is a complete anatomical fit of TomoFix plate biomechanically favorable? A parametric study using finite element method

Hayatbakhsh Zahra, Farahmand Farzam, Karimpour Morad (2022)., Archives of Bone and Joint Surgery-ABJS, 10(8).

3. Influence of the angle between tibial and prosthesis mechanical axes on tibial bone remodeling in total knee arthroplasty

Hadizade Hosein, Hadizade Hassan, Ganjiani Seyed Mehdi, Karimpour Morad (2022)., PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 1(1), 095441192211077.

4. Effect of grain size on fracture behavior of pure magnesium sheet: An in-situ study combined with grain-scale DIC analysis

Nazari-Onlaghi Snia, Sadeghi Alireza, Karimpour Morad (2022)., MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 832(1), 142396.

1. Effects of Genu Varum Deformity on The Activation Patterns of The Knee Abductor and Adductor Muscles During a Complete Gait Cycle

Tabeiy Sina, Karimpour Morad (2021)., Second International Conference on Motion Analysis, 15 December, Tehran, Iran.

2. The investigation of the effect of pore size in 3D printed porous titanium implants on osseointegration

مرادخانی غزاله, Karimpour Morad, Taheri Seyed Mahmoud (2021)., 29th annual meeting of the Iranian orthopedic association, 1-5 November, Tehran, Iran.

3. Effect of 3D-printing and compression molding on anisotropy of ABS micro specimen: A comparative study based on DIC

Nazari-Onlaghi Snia, Sadeghi Alireza, Karimpour Morad, محمدی هادی (2021)., Amirkabir Journal of Mechanical Engineering, 1(1).

4. Design and Shape Optimization of a Biodegradable Polymeric Stent for Curved Arteries Using FEM

Baradaran Yasaman, Baghani Mostafa, Kazempour Morteza, Hosseini Seyed Kianoosh, Karimpour Morad, Baniassadi Majid (2021)., FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 7(1), 44.

5. Investigation of the effect of the angle between femoral and prosthesis mechanical axes on bone remodeling of femur in total knee arthroplasty

Hadizade Hassan, Hadizade Hosein, Ganjiani Seyed Mehdi, Karimpour Morad, Hosseinpour Abolfazl (2021)., PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 1(1), 095441192110161.