1. Adsorption of gases in acetate functionalized silica: Experimental and Monte Carlo molecular simulation study

Karimi Somayeh, Alizadeh Sahraei Abolfazl, Khodadadi Abbasali, Foroutan Masumeh, Hedlund Jonas, Larachi Faical, Mortazavi Yadallah (2025)., SEPARATION AND PURIFICATION TECHNOLOGY, 363(1873-3794), 131958.

2. Adsorption of gases in acetate functionalized silica: Experimental and Monte Carlo molecular simulation study

Karimi Somayeh, Alizadeh Sahraei Abolfazl, Khodadadi Abbasali, Foroutan Masumeh, Hedlund Jonas, Larachi Faical, Mortazavi Yadallah (2025)., SEPARATION AND PURIFICATION TECHNOLOGY, 363(1873-3794), 131958.

3. Exploration of electrostatics effect on dispersion and coating mechanisms in dry powder inhalers by discrete element method

Saeid Pooya, Kazemi Saman, Zarghami Reza, Sotudeh Gharebagh Rahmat, Mostoufi Navid (2025)., COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 713(-), 136540.

4. Exploration of electrostatics effect on dispersion and coating mechanisms in dry powder inhalers by discrete element method

Saeid Pooya, Kazemi Saman, Zarghami Reza, Sotudeh Gharebagh Rahmat, Mostoufi Navid (2025)., COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 713(-), 136540.

5. CFD-DEM investigation of fine charged particle coating in fluidized beds

Kazemi Saman, Tashakori-Asfestani Fatemeh, Kheirabadi Sina, Zarghami Reza, Mostoufi Navid (2025)., CHEMICAL ENGINEERING RESEARCH & DESIGN, 216(-), 160-173.

6. CFD-DEM investigation of fine charged particle coating in fluidized beds

Kazemi Saman, Tashakori-Asfestani Fatemeh, Kheirabadi Sina, Zarghami Reza, Mostoufi Navid (2025)., CHEMICAL ENGINEERING RESEARCH & DESIGN, 216(-), 160-173.

7. Experimental and modeling investigation of gas hydrate phase equilibrium for methane/propane/n-heptane (MPH) ternary hydrates

Razavizadeh Seyedeh Sahar, Nakhaee Ali (2025)., Geoenergy Sicence and Engineering, 247(-), 213690.

8. Analysis of Biomass Gasification in a Fluidized Bed Using CFD-DEM

Khodabandeloo Ramin, Nourozi Hamid Reza, Larimi Afsanehsadat, Mostoufi Navid (2025)., ENERGY, 320(-), 135395.

9. Prediction of minimum miscibility pressure of CO2-oil systems using grey-box modeling for carbon dioxide capture, utilization, storage, and enhanced oil recovery

Asghari Milad, MoslehI Sajjad, Emami Niri Mohammad, Kord Shahin (2025)., Journal of Petroleum Exploration and Production Technology, 15(3).

10. Assessing Hydrogen Leakage in Underground Hydrogen Storage: Insights from Parametric Analysis

Hashemi Milad, Sedaee Behnam, Fathi Yousef (2025)., ENERGY & FUELS, 39(7), 3668-3682.

11. Opportunities and Challenges in CFD-DEM for Advanced Multiphase Flow Simulations

Mostoufi Navid (2025)., International Conference on Recent Advancements in Chemical Engineering (RACEEE-2025), 6-7 February, Chennai, India.

12. Methanol to gasoline process: Design and analysis of a structure with the minimum energy requirement and proposal of a novel integrated configuration to improve profitability

Palizdar Ali, Vatani Ali (2025)., ENERGY, 316(-), 134459.

13. Numerical investigation of acid diversion using viscoelastic surfactant (VES) under single and two-phase flow conditions

منظری توکلی محمد حسین, Sedaee Behnam, Mahmoodi Ali (2025)., Journal of Petroleum Exploration and Production Technology, 15(2).

14. Super-effective biochar adsorbents from Co-pyrolysis of rice husk and sewage sludge: Adsorption performance, advanced regeneration, and economic analysis

Rezvani Behnam, Hallajisani Ahmad, Tavakoli Omid (2025)., Bioresource Technology Reports, 29(-), 102046.

15. Geophysical bayesian inverse problem solving with tuning-free adaptive MCMC sampler

Arabpour Amin, Hamidzadeh Moghadam Rasoul, Emami Niri Mohammad (2025)., Earth Science Informatics, 18(2).

16. Decoupling interfacial compatibilization and chain extension in polymer blends using rheology: PBAT/EVOH with MDI

Dadashi Parsa, Soltani Ensieh, Elhamnia Mehdi, Hashemi Motlagh Ghodratollah (2025)., JOURNAL OF POLYMER RESEARCH, 32(2).

17. Design and Analysis of a CO2-to-Olefins Process, Using Renewable Energy

Aleaziz Farbod, Tahouni Nassim, Panjeshahi Mohammad Hassan (2025)., ENERGY CONVERSION AND MANAGEMENT, 324(-).

18. Design and Analysis of a CO2-to-Olefins Process, Using Renewable Energy

Aleaziz Farbod, Tahouni Nassim, Panjeshahi Mohammad Hassan (2025)., ENERGY CONVERSION AND MANAGEMENT, 324(-).

19. A novel electrical rock typing approach to improve estimating formation resistivity factor in carbonate rocks

Mohammadi Milad, Emami Niri Mohammad, Bahrodi Abbas, Soleymanzadeh Aboozar, Kord Shahin (2025)., Journal of Petroleum Exploration and Production Technology, 15(1).

20. Molecular insights into the role of external magnetic field on asphaltene deposition: Implications for green approaches to asphaltene management

Ghafari mohamad Ali, Mabudi Amir, Riahi Siavash (2025)., FUEL, 379(-), 133022.

21. Cyclic chromatography processes as hybrid systems: Dynamic simulation and optimal design for 5-HMF/water separation

Asadi saeid, Fakhroleslam Mohammad, Fatemi Shohreh (2025)., Journal of Water Process Engineering, 69(-), 106847.

1. Synthesis and characterization of spinel-based catalyst for sonocatalytic removal of ciprofloxacin antibiotics

Ebrahimi Shadi, Ebrahimian Pirbazari Azadeh, Zarghami Reza, Esmaeili Khalil Saraei Fatemeh (2024)., The 9th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-9), 17-18 December, Tehran, Iran.

2. AI-Driven Tools in Oil and Gas: Paving the Way Toward Sustainability

Sotudeh Gharebagh Rahmat (2024)., 5th international Biennial Oil, Gas and Petrochemical Conference, 17-18 December, Bushehr, Iran.

3. Production of Ultra-pure Lithium Hydroxide, A Widely Used Material in The Production of Lithium-ion Batteries, Lithium Composites and Completing the Chain of Lithium Compounds from Its Halide Salt by Membrane Electrolysis method

Habibi mohammad amin, Rajaei Farid Sogand, Keynejad Kamran, Azizpour Hedayat (2024)., The 9th International Conference on Composites: Characterization, Fabrication, and Application, 17-18 December, Tehran, Iran.

4. Morphological Evaluation of Conductive Polymer Blends by EIS measurements

Dadashi Parsa, Hashemi Motlagh Ghodratollah (2024)., 17-18 December, Tehran, Iran.